There is nothing wrong with the Logitech Pebble M350 mouse, but it is not ideal for everyday use. Due to its low profile and small form factor, it can easily be slipped into a laptop bag, but it isn’t especially comfortable to use for long periods. Using its USB receiver or Bluetooth, this wireless mouse is very straightforward. However, you cannot customize its sensor based on your preferences, so its performance is, at best mediocre.

Despite all this, sometimes Logitech Pebble M350 is not connecting to Macbook/macOS. Yes, there are many reports regarding this issue. Well, that’s why we are with this article; here, we will tell your how to fix if the Logitech Pebble M350 is not connecting to Macbook/macOS. Therefore, let’s get started with the guide:

Also Read

Fix: macOS Ventura WiFi Not Working Issue

Fix: macOS Monterey Not Connecting to WiFi

Continuity Camera Not Working After macOS update, How to Fix?

Fix: Cannot Change Folder Background Color in Mac (macOS Ventura)

How To Fix Logitech Pebble M350 Not Connecting to Macbook/macOS

You can fix the Logitech Pebble M350’s not connecting to Macbook/macOS issue using the methods we have discussed further in this guide. So, don’t worry and read the guide until the end. Therefore, let’s begin:

Fix 1: Reconnect Your Mouse

Your mouse may have a technical problem if it does not connect to Macbook/macOS. I recommend reconnecting your mouse in this case.

The not connecting problem has been reported to be resolved by many users after connecting their mouse. If you are not familiar with doing it, these steps can help:

  • First, turn on your Logitech Pebble M350.
  • Then click Connect on the channel you want to connect to.
  • That’s it. Try again to see if the mouse starts connecting or not.

Fix 2: Reboot Your Device

You can simply turn your device off and then turn it back on again. The device will be restarted after you perform these steps. Well, there are possibilities that your mouse may not be the cause of this issue in this case, but rather an unwanted cache file that is on your device.

The only way to fix this issue is to delete these cache files. There’s nothing complicated about it. Using the Logitech Pebble M350 Wireless Mouse requires only a restart of your entire computer system before reconnecting. It will now appear that the issue has been resolved.

Fix 3: Update macOS

It is possible that after an update of your Macbook OS, it will perform better. However, it is advisable to be cautious when installing updates on a slow system or an old piece of hardware. 

I’ll save that for another day in another article. Thus, updating your operating system becomes more crucial when you have a powerful computer. However, unfortunately, there are frequently compatibility and minor changes associated with these updates, and if we fail to notice them, we will experience this problem. 

Fix 5: Check For Damage

Dropping your Logitech Pebble M350 mouse previously might damage the internal mechanisms and cause it to malfunction.

To ensure that your mouse is not damaged, you should thoroughly inspect its body for any exterior damage. Nevertheless, if you find any, contact the nearest service center immediately.

Fix 6: Power Cycle Your Mouse

Make sure you power cycle your Logitech Pebble M350 mouse if you continue to have issues connecting it to your Macbook/macOS. Nonetheless, the batteries must be removed from your mouse, and the mouse must be turned off. Afterward, insert the batteries and wait a bit. Now, you will find that it is functioning properly again. 

Advertisement

Fix 7: Damage Batteries

Depending on how often you use your peripheral devices, their batteries generally last six months, but sometimes only three months. It is therefore possible that your mouse batteries need to be replaced.

In order to see whether the issue has been resolved or not, you must first charge your Logitech Pebble M350 Wireless Mouse. Pebble M350 batteries can be damaged if they are not charged properly.

If this occurs, you’ll need to replace them before checking. It was reported that users had automatically solved the not connecting to Macbook/macOS issue by replacing the batteries.

Fix 8: No Other Device is Connected

If your PC is connected to another Bluetooth device, it may not detect your Logitech Pebble M350 wireless mouse. The Pebble M350 should therefore be connected first after the other device has been disconnected.

Fix 9: Update the Logitech Unifying Software

If you are unsure whether your device is updated with Logitech Options Software, go to Logitech’s official website and search for it.

You should ensure that the version of the app that you are using on your device matches the one available on the company’s website. First, you must uninstall the old version of the software. After that, proceed with the normal installation procedure.

Fix 10: Reach To Logitech Help Desk

You should search for peer-to-peer assistance in the Logitech community if you’re still experiencing Macbook/macOS not connecting errors. When it comes to customer support, you can reach out to us when your system is first set up through toll-free phone calls or emails.

If you use them to raise your complaint ticket, they will respond within seven days of receiving it. Therefore, once you have submitted your request, you simply need to wait patiently for the response.

So, that’s how to fix the Logitech Pebble M350 not connecting to Macbook/macOS issue. We hope that you find this guide helpful. However, for any doubts or queries, comment below and let us know.