We all have heard the name of DJI Drones. They are considered one of the best drone companies. The DJI FPV is a first-person view drone that comes with a lot of features. The Drone has the support of 4K resolution. It has a super-wide video feature, and much more. The drone is also capable of low-latency transmission. It also has emergency brakes, which will help in stopping/landing the drone.

These days drones are widely used for event videography, by professionals for taking different shots, for social media posting, and much more. So, the DJI FPV drone is made accordingly to it. Other features included in it are S-Mode, Smart Return To Home feature, Low Battery RTH, and much more.

If you are using the DJI FPV drone then you might be knowing about the country code required for it. The country code helps in deciding how much the drone can fly far. So, if you have not set the DJI FPV country code then you will get this error every time before flying the drone. Check how to update it.

Also Read

DJI FPV Won’t Take Off, How to Fix?

Fix: DJI FPV and FPV Goggles Not Turning On

Fix: DJI Mic Not Linking or Working With iPhone

Reasons For Country Code Not Updated 

So, if you are facing this issue then be with us as we will tell you the steps through which you can fix this issue. But, before that, analyze the issue first so you can easily fix it. So, we are listing out some of the common problems through which you can fix this issue. Therefore, check out the reasons below.

  • Software Bug
  • Satellite Issues
  • Goggle Issues
  • Firmware Problem

How To Fix DJI FPV Country Code Issue

So, follow the methods which are given below to fix this issue. Make sure to implement it carefully to resolve the issue.

Restart The Device

So, if you are facing this issue, then the first step that you should do is to restart your Drone. So, if there is any bug, then it will be fixed when you turn off and on the drone. Therefore, restart your device to try to resolve this issue.

Verify The Number Of Satellites

So, the other step which you should try is to go outside of your home or to a location where there are fewer trees and objects. Also, check that there should be more than 10 satellites available. After it, connect your phone to the fly app, and then you will see that the Country code will be updated easily.

Plug in Your Phone To The Goggles

You can also try plugging your phone into the Goggles to avoid this issue. So, before flying the drone, make sure to plug in your device to avoid this issue. However, this is not a permanent fix, as you will see the error whenever you try to fly the drone without plugging the phone.

DJI Assistant 2

If you are still facing the issue, then you can also try this method where you will require to download the DJI Assistant 2. Therefore, after downloading, do the following steps to update the country code.

  • Turn on the drone, remote controller, and goggles
  • After it, plug each device one at a time into your computer
  • Now, refresh the firmware in each device
  • So, after doing the refresh, the country code will be properly set.

Check whether the issue has been fixed for you or not. If not then try the other methods.

Re-flash The Firmware

So, if you are still facing the issue then you can try flashing the firmware. As this method has helped many users. So, we would suggest that you should also try it. So, flash the firmware and after it again check whether the issue has been solved or not.

Contact Customer Support

So, if you are still facing the issue then take your drone to the service center as they will fix the issue. Therefore, they will also analyze whether the issue is caused because of the software or hardware issue. So, we recommend you to go to the service center if you are facing this issue continuously even after trying to resolve it.

Conclusion

In this article, we have discussed the various methods for fixing the issue. Along with the common issues through which the issue is persisting to the user. So, I hope all the steps which are explained are clear to you and you are able to easily implement them. Therefore, try implementing the steps carefully. Also, if you have fixed this issue through any other methods then do share it with us in the comment section below.

Advertisement